Congratulations wise and thrifty friend! After 3 years and a million dollars we have developed 2 products that stop water waste, the POTTYMISER® and SHOWERWIZARD®. You won’t be overpaying on water bills ever again. Today you take back control from the defective toilet manufacturers, overcharging water utilities, careless tenants, wasteful consumers and all the expensive water leaks waiting for plumbers to repair. These people aren’t paying the bill You Are! Now it’s your turn to cut costs and make everyone accountable for their behavior.
I bid you success on your journey and may you enjoy all the great benefits from both the POTTYMISER® and SHOWERWIZARD®.
(See diagram for additional detail)
1. Turn water off at the shutoff valve behind toilet and/or the main shutoff for the house.
2. Disconnect the supply line where it connects to the fill valve stub under the tank.
3. Hand tighten POTTYMISER® valve to the fill valve stub and reconnect the supply line to the POTTYMISER® valve. Hand tighten only and go easy or this connection will leak.
4. Turn the water back on.
5. Insert 4 AA batteries into the battery compartments on the back of the POTTYMISER® dome assembly.
NOTE: When the 4th battery is inserted, the POTTYMISER® will start a 30 second fill cycle (see directions for daily use).
6. Place the pottymiser dome assembly on top of the tank or hang on the wall using included Velcro or screw.
A few words about the POTTYMISER® and its operation:
The POTTYMISER® operates on 4 AA batteries which should last 12 months under normal use. As the batteries near the end of their life, a change to a triple flash from inside the POTTYMISER® dome will be noticeable when starting a fill cycle. Seeing this low battery light indication tells you it’s time for new batteries. Should the batteries fall below the next preset voltage minimum the tank will not fill and the toilet will not flush. When the batteries are exhausted the light will flash continuously until they are replaced.
The POTTYMISER® eliminates toilet leaks and trains every user to be water conscious. The 2 steps of activating the POTTYMISER® and “then flushing” will take water conservation to a higher level. A typical toilet with a medium size leak will waste $50 to $200 of water a month depending on the malfunction. On average, 1 in 5 toilets are leaking right now!
Read more at pottymiser.com
Directions for daily use of your POTTYMISER®
1. Before using the toilet press the POTTYMISER dome to activate the device. A flash of light from inside the dome indicates you have started the tank fill cycle.
NOTE: if a full flush is needed, some toilets may require 2 cycles to fill the tank.
2. While you complete your toilet use, the tank will fill. When finished, flush normally.
It’s as simple as that!
Note: Never remove the batteries while the device is activated, this will damage the device.
Now introducing the SHOWERWIZARD®
You may be interested to learn about our other signature product
The SHOWERWIZARD® conserves water, eliminates leaks and trains every user to be water conscious. The 2 steps of activating the SHOWERWIZARD®, turning on the water “and then showering” will take water conservation to a higher level. A typical shower with a duration of 6 minutes is sufficient with another bonus minute for 7 total minutes. This will save 3 minutes of time over 6 gallons of water and the required energy for the hot water. There will be massive savings each year!
Read more at pottymiser.com
The manufacturer warrants this product to be free from defects in workmanship and materials under normal residential use and conditions, for a period of 30 days from the original invoice date. Shipping and handling fees are to be paid by the customer. The manufacturer agrees at its discretion during the warranty period, to repair any defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge (except for a fee for shipping, handling, packaging, return postage, and insurance which will be incurred by the customer). Such repair or replacement is subject to verification of the defect or malfunction and proof of purchase as confirmed by showing the model number on original dated sales receipt.
If you have any problems using our products, please contact Customer Support.
(567) 455-3760. You can email us at: email@example.com